The oil capacity for a 2000 Mazda Protege with a 1.6 Litre engine is 2.9 litres with an oil filter change ........... it is 2.7 without an oil filter change but who in their right mind would change an engine's oil without changing the filter is beyond me ??!!
3.4 quarts without oil filter replacement. 3.8-4.0 quarts with oil filter replacement.
No , the 1.8 liter 4 cylinder in a 1999 Mazda Protege is not an interference engine
No , it is not an interference engine
Yes it does I too own a Mazda protege 95 with a 1.5 liter and i had to replace the tone ring on my mazda. I ask what does this do and the shop told me its for the abs. But only the LX and ES model has it.
The idle air control valve is also known as the idle speed valve. On a 1999 1.6 literÊMazda Protege, it is located at next to the throttle body.Ê
Every 90,000 miles per Mazda
yes, it has an oil filter.
I think it would be 1,3 and 4,2
The recommended spark plug gap is .044"
The Mazda 2.0 liter engine oil filter can be found on the left-hand side of the engine. The oil filter will be near the oil pan.
the engine can be either a: 1.6 liter 4 cylinder or 1.8 liter 4 cylinder
This information is listed in your owner's manual and on a placard under the hood.
please send to my e-mail address firstname.lastname@example.org
The Kia 1.8 liter engine is a Mazda engine used in the Protege' from the mid-90s. That and the 2.0 liter engine used in 1994-2002 Sportages were used from Mazda and if the timing belt breaks, it will NOT damage the valves, thus a non-interference engine.
The fuel filter, on your Ford F2 57.3 liter pickup truck, is located in the gas tank. The fuel filter can only be accessed by removing the gas tank.
The oil filter on a 1995 Chevy Tahoe 5.7 Liter is located in the undercarriage. It is just above the oil drain plug.
where is the oil filter located on a 2009 chevy malibu?
1.8 liter single cam engine: 4 to 6 degrees BTDC 1.8 liter dual cam engine: 9 to 11 degrees BTDC
you must unbolt the frame from the body to be able to access 2 bolts
The 2000 Mazda 1.8 liter engine valve cover torque specification is 45 pounds. The valve cover bolts should be torqued in 15 pound intervals.
Both the 1.6 Liter and the 2.0 Liter have a timing belt that must be replaced every 105,000 miles. The 1.6 L is not an interference engine but the 2.0 L is an interference engine.
The fuel filter is located above the inboard edge of the fuel tank.