It is mounted to the rear of the throttle body.
It is a Throttle Position Sensor
It has an IAC ( idle air control ) motor on the throttle body.
the tps on a 93 2.3 is located on top of the throttle body...good luck in trying to change it ...its not easy ..
Sensor is located on the drivers side of the oil pan.
Yes, it attaches to the end of the throttle plate and reads it's angle.
IT will be in the duct work,going from the air filter box to the throttle body.
On the throttle body, opposite side of the throttle cable.
Throttle linkage could be in a bind or TPS is defective. (throttle Position sensor)
yes it should as it's basically the same body.
does a 99 camaro fornt end fit a 95 camaro
Go to www.autozone.com and click component location.
how to bypass vats on 95 camaro
Engine Coolant Temperature Sensor Circuit -replace the temp sender under the passenger side of the throttle body and reset the mil light.
directly under throttle body
No, it does not have a crank sensor. the optispark (distributor) does the job that a crank and cam sensor would do for that model of Camaro. they added one for sure in 1997 I know that because I have had a 93 94 95 and 97 Camaro z28 not sure if 96 has one or not I haven't had one of those to work on but they are real easy to find on the models that have them they are located at the bottom of the timing cover and have a 3/8 bolt that holds them in.
no,they don't fit. They have a different throttle body fitting.
190 to 210
The air filter housing is attached to it.
Yes, my grand am had that problem a week ago, changed out the sensor and it runs like a champ!
You may have a throttle position sensor going out or possibly the fuel pump. Get some throttle body cleaner and clean the throttle body inside to make sure the throttle blade inside the body is not hanging up and then get a fuel pressure gauge and connect it to the fuel raila nd see what kind of pressure you get when you rev the engine..and see if there is a drop when you open the throttle.
same thing happened to my 95 camaro 3.4l it sounds like your coolant sensor
Yes all all of the parts from the 95 will fit the 97 and vice versa, They are the exact body styles. 1993 to 1997 will all be interchangable