IT will be in the duct work,going from the air filter box to the throttle body.
The Intake Air Temperature (IAT) sensor (GM part# 12160244) is in the Air Intake Duct, between the Throttle Body and the Mass Air Flow (MAF) Sensor.....
The Intake Air Temperature Sensor is loctaed in the side of the Air Filter Case, look for a wired connector attached to it.
the intake air temp sensor, goes in hose from air cleaner to throttle body!! disconnect electrical connector at sensor, then pull sensor from hose.
The intake temperature sensor is located on the side of the air filter case on a 2003 Chevy Silverado 4.3 1500. It is on the top of the engine.
The intake air temperature sensor can be found on the top of the air intake manifold. The temperature sensor should be labeled as such.
The IAT (Intake Air Temperature) Sensor is a Two (2) Wire sensor located close to the intake.
That sensor was not used on that year. IT DON'T HAVE 1
The air intake temperature sensor can be found on the top of your manifold intake. The sensor will be right in the middle of the intake manifold.
There is no Intake Air Temperature sensor on a 1995 only 96 and newer. If you are asking because you are putting some sort of performance module on it then you need to hook that up to the Coolant temperature sensor which is located next to the thermostat and it is a two wire sensor.
It should in the air filter box or if you have a MAF sensor, the intake air temperature sensor is a part of the MAF.
The intake air temperature sensor on a 2005 Subaru WRX is part of the mass air flow sensor. It is located in the air intake duct.
Intake Air Temperature. Is used to calculate air density for the fuel injection