Mounted on the transmission.Remove the transmission pan and filter. You will see the transmission control solenoid and the transmission speed sensor. Replace trans. filter after you replace the solenoid.
You have two fuse boxes on this ride. One is on the side panel of the passenger side (inside) of vehicle and the other is under the hood on the passenger side. Maybe this will help. Udontno
Inside the transmissison, on the valve body.
On the valve body, part of o/d solenoid.
Two sensors in the same part, yes.
23
it tells the radiator fan when to turn on
Under hood, center, upper engine area, mounted in driver side of water outlet
The 2014 Jeep Grand-Cherokee has a 8-speed shiftable automatic.
Two sensors in the same part, yes.
The crankshaft sensor on a 4.0L Jeep Grand Cherokee is mounted on the top driver side of the transmission bell housing.
Usually a crankshaft sensor is located on the bellhousing of the transmission
The speed sensor is located on the drivers side of the transfercase, you will see a sensor with a connector, that is your sensor.
23
The governor pressure sensor is on the passenger side of the valve body inside the transmission.
It is inside the transmission, on the passenger side of the valve body.
The engine coolant temperature sensor is the sensor that is screwed into the thermostat housing on the top front of the engine.
Take the transmission pan off>take filter out>govenor sensor housing in this area
The crankshaft position sensor is on the top driver side of the transmission bell housing.
where is the fill tube for the transmission on a 2001 jeep grand cherokee
The crankshaft position sensor is on the top driver side of the transmission bell housing.