Want this question answered?
On a Dodge truck, the vacuum switch is on the transfer case.On a Dodge truck, the vacuum switch is on the transfer case.
on top of the transfer case. You should see 4 vacuum lines going to the top of the switch
The vacuum switch is on the top of the transfer case. The 4wd indicator switch is on the front axle shift actuator.
If equipped, it is on the top of the transfer case and has four vacuum lines plugged into it.
on the top of the transmission its on the transfer case with 3 vacuum lines coming out of it.
The Grand Cherokee did not come out till late 92, but was concidered a 93 model. However this link may help you find what your looking for: Read the bottom info on said page. http://www.1aauto.com/1A/4WDrive/-/-/1AFWA00005 The switch mounts directly on transfer case.
The vacuum actuator is on the right side of the axle. The electrical switch is on the actuator. The vacuum switch is on the top of the transfer case.
Either the transfer case is still in part time or there is a failure in the switch on the transfer case.Either the transfer case is still in part time or there is a failure in the switch on the transfer case.
there is a 4x4 switch on the transfer case. i found it when my vehicle control center said to "service 4x4 switch"
It is on the top of the transfer case.
in the middle towards the front of the case, has 4 or 5 plugs coming out of the top
Some systems require the engine be at low power to shift, the easy way to ensure this is to use a vacuum switch Also some cases use vacuum to actually shift into 4WD