If you can troubleshoot the problem without opening your computer, that is best. So, connect a known working monitor to see if it works. If not, I guess you have to suspect the video card. :)
The monitor
Write a monitor solution to the Readers/Writers problemWrite a monitor solution to the Readers/Writers problem
Yes. you will get rid of the problem because the monitor will have better display features.
My problem was the transmission causing the chugging. I had the tranny fluid replaced and to my suprise it fixed the problem. It cost around $110.00 for the fluid exchange, but was well worth it. Hope this suggestion helps.
did you put a magnet on it? usually that is the cause no
Use the OSD buttons on the front of the monitor
If you are facing the problem of low discharge airflow to the cooling space causing low cooling performance which can lead to possible damage to the compressor of the air conditioners.
There might be a problem with the cable between the computer and the monitor, or with the graphics card inside the computer. Check that the cable is plugged in between the computer and the monitor. cable,monitor and graphics card all work but I still can't get the monitor to work no signal could the processor cause this problem
If it has been working normally before this--no black border--then the monitor may have become unplugged from the computer. Shut down the computer. Unplug and then replug in all of the connecting wires, make sure the On button on the monitor is on. Image should be there when you turn the computer back on. If this doesn't work, try hooking the monitor up to another computer. If you have the same issue, the problem is the monitor. If not, the first computer is the problem.
Yes. You will get rid of this problem because the mouse motion will be synchronized with no latency.
Am guessing your having problems with the monitor...First check if the monitor's (the screen) has any wires that are damaged, try the monitor on a different computer if the monitor works in a different computer than it could be the video card that is giving you a hard time.make sure all cables are plugged in correctly and check the video card to see if its damaged or is it properly adjusted in the motherboard, and also check the BIOS settings to make sure the video card is selected.
External monitor needs adjustment to eliminate tint.