Most lawnmowers loosen to the left. At least that's how I do it.
most likely 2, look underneath
Raise the machine up so you can safely work under the deck. I use a piece of 2" by 4" aprox 6" long and use it to jam a blade so that it won't turn while you remove the center bolt from the blade you have jammed with the piece of wood. Install the blades in the same manner.
I changed the blade belt on my Murray mower. Now one blade stops and goes. If I lower the deck the blade stop . What did I do wrong?
A Murray riding lawnmower owners manual can be obtained from most Murray riding lawnmower dealerships. You can find the owners manual at most local libraries.
if you are sitting in the seat and looking down at the deck the blades will or should be turning clockwise, although in this position you cannot actually see the blades. pay attention when installing the blades not to turn them upside down. the cutting edge should be turninh clockwise on all blades.
In order to replace the drive belt on a 42 inch cut Murray riding lawn motor, first remove the blade after disconnecting the spark plug. The drive belt is now exposed for easy replacement.
when is ty murrary bull riding school
how to install a spring clutch on a murray mower
One of several reasons: (1) the blades need sharpening; (2) you are trying to mow at a higher speed than is required; (3) one or both blades are installed upside down; (4)one or both blades are bent. My best guess is (1) and/or (2).
2 21inch blades.
I have Murray 42" cut riding mower that the belt came off. How do I put the belt back on?
what size belt do i need with a murray riding lawn mower that is a 12.5hp. 40"