0
Which fuse is for the brakes also is there a re-set button for the brake switch Thanks?
Bunsen55ci
brake light is on from either ur parking brake switch(shorted, switch stuck) or low brake fluid if fluid is low its very likely ur need front brake pads.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Why do you have to pump on the brakes to get the brake lights to come on?
You need to adjust your brake light switch. It should be located on the brake pedal. Unplug the switch and loosen the nuts to adjust the button closer to the brake pedal.
Why is the Brake Lamp on a 94 Honda Accord continuously on when all light brakes are working fine?
More than likely, your brake switch is fused, or stuck down.... here. when you push on the brake, the pedal taps a button to indicate that the brakes have been pressed. this button is a gate to the power provided to the tail lights, therefore, when it is pressed, they light up. this button could be stuck. disconnect the harness and see if the lights go off. if they do, replace the switch.
Where is the brake pedal switch 1972 Corvette?
I repaced the brake power booster on my 72 vette now the brake lights come on automatic as soon as i start the car i can visually see the brake pedal go down maybe one inch thats all it takes for the brake light switch to dinsingage that little button at the end of the brake switch that petrudes causing brakes to come on is there a adjustment?
How do you cut off the brake light on a 2003 Mercury Mountaineer?
The brake light is controlled by a little button switch that's mounted high on the brake pedal lever. If you follow the brake pedal upwards with your fingers, you'll feel the button. It has a spring in the button that pushes the button back out when you release the brake pedal. If the spring jams, the brake lights stay on. Replace the button switch.
Where is the Brake light switch Nissan pintara 1988?
There is no switch to activate or deactivate the brake lights on a 1988 Nissan. The brake lights automatically turn on any time the brakes are pressed.
What is a push to brakes switch?
A push to brake switch is a switch were it cancels out the circuit so that the electricity cannot flow through the circuit.
What does Service brake fluid switch mean?
It's telling you the brake fluid reservoir is low and the brakes need attention.
Will a bad brake light switch cause shift lever to jamb?
yes. many late model automatics require you to have the brakes on, before shifting into gear..... the auto uses the brake switch to "unlock" the the shifter when the brakes are on... ergo.... switch is faulty, then the auto won't "unlock"
Where is the stop lamp switch located on 2011 KIA Sportage?
If you mean the switch that turns on the brake lights when you put the brakes on , it is above the brake arm of the foot pedal.
Why do the brake lights stay on in your 1998 Cadillac Catera?
you need to replace the brake light button under the brakes inside the car
Why do your brake lights stay on all the time and go out when you hit the brakes on your 89 chev 1500 you did replace the brake switch?
If you replaced the brake switch it sounds like you put the new one on backwards.
Why would the brake lights stay on whenever the car is on even after you have replaced the brake light switch?
Out of adjustment. Adjust the mounting of the switch so the brakes lights are off until you press the brake pedal.
