Any pool vacuum can, including the Polaris.
How do I vacuum an above ground doughboy pool?
A vacuum head that has a brush on the bottom - no wheels.
Yes
The same as the floor vacuum inside the house but instead of it sucking air it sucks water through the filter. Just run the pool hose from the pool vacuum to the vacuum plate over the top of the leaf basket. then turn on the pump and runi t along the floor of the pool.
Like any other above ground pool, maunally with a hose, pole and vacuum, or with an automatic cleaner.
If your filter is repaired then you can just vacuum the pool.
submerge the hose in the pool first to get all of the air out, then attach to the skimmer.
If the pool is shocked give it a scrub down with a pool broom / brush leave it for a day then vacuum the rubbish of the bottom. If there is a lot of algae present Vacuum to waste
You should not put chemicals in the pool while the vacuum is in. Put the chemicals in and give them a chance to work first. Then you can vacuum and backwash the filter as needed.
Like any other above ground pool, maunally with a hose, pole and vacuum, or with an automatic cleaner.
Normally a swimming pool had a static skimmer installed at the side of the pool this is where the surface water from the pool runs through a leaf basket to the filter. a vacuum plate fits over the leaf basket area. A hose can be plunged into the vacuum plate that hooks into a pool floor vacuum head. this head is connected to an aluminum pole or handle after that you use it the same as a normal vacuum cleaner. A pool shop will be able to advise you on the correct choice of hard ware. RB
Long enough to clean the pool.