answersLogoWhite

0


Best Answer

Does your hazard lights only work when you turn the flashers on and the turn signal on at the same time? GM is known for having a multi-purpose switch... this switch controls your lights, turn signals, hazard lights and high beams... sometimes cruise control too... well anywho, sometimes that switch is partially broken... I recommend hooking a multi-meter to the wires that hook the multi-switch up and test all the functions of the switch... but I guarantee if you put a new multi-switch on the car that your hazards lights will function properly... I also recommend buying the part through an after-market company because it is cheaper...

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why Chevy hazard lights flash when turn signal is used?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

2001 Chevy Cavalier hazards lights flash but blinkers do not work is it the turn signal bulbs that need to be replaced or the flasher?

If neither signal light works, the flasher may very likely be the problem. The hazard lights and the signal lights work off different flashers.


Why does the turn signal flasher keeps blowing out?

There is a short in the wires in the turn signal circuit. The combination switch in the steering column is a good place to check. Do the hazard lights still flash?


Why do hazard lights work but turn signal does not flash on 1996 Pontiac Bonneville?

You have a bad relay. Your blinkers run on a different relay than you hazards do.


Why do the turn signals buzz and not flash but the hazard lights work on a 1991 Isuzu Rodeo if the bulbs and fuses are good?

Try replacing the turn signal flasher


What would cause the turn signal lights on a 1992 Explorer to light up but not flash The emergency flashers work but the turn signals will not flash?

either a bulb or the signal flasher relay located on the fuse panel usually opposite the hazard flasher relay


What are turn signal indicators?

Turn signal indicators are lights. The flash to tell you, or indicate, that a turn signal is on, and which way the lights are flashing.


Why do the hazard lights blink when break?

if you mean: "why do hazard lights flash when brakes are on", then the answer is because vehicles are equipped with a hazard light relay that supercedes the brake lights. This way, slow moving vehicles can operate under hazard lighting.


How do you make my hazard lights flash like a strobe lights in a 1995 tarus?

To make the hazard lights alternating flash, a kit called a wig wag is added to the flasher system. To have actual strobe lights, then a strobe kit with its own light has to be installed.


How do you fix the turn signal on your 1992 Chevy Caprice?

How do I replace turn signal on a 1992 Chevrolet caprice classic I want to learn how to do it myself


Where is the turn signal flasher located on a 1987 EB big bronco My hazard lights work but when I turn on my turn signal all correct front rear and indicator lights come on but dont flash.?

The hazard and turn signals each have their own flasher relay. They should be fairly close to each other under the dash. They are the same flasher part.


Why does a 1994 Buick LeSabre's turn signal sporatically flash when signaling to turn but work fine for hazard lights?

The front or rear turn signal flasher bulb may be burned out and needs to be replaced. The turn signal flasher my be defective and should be replaced. The hazzard lights have a flasher unit of their own. These are found up in under the dash in the steering column area.


Turn signals wont flash but hazards do?

replace turn signal flasher, hazard flasher is separate