The wires go thru the turn signal switch which may have a bad ground. Try and pull back on the turn signals and see if the lights come on with your foot on the brake....
If emergency brake is on 1 click it turns daytime running lights off. Pull out on emergency brake handle and see if this fixes the problem.
The emergency brake release on a 2010 Chevy Malibu is located beside your left foot. You would push down on the emergency brake pedal to release it while having your right foot on the regular brake.
Chevy venture is a mini van, made up until a few years ago. Buick made a ventura in the late 70's, which was their version of the Nova. It is a rumor that the Nova name is an acronym for Nova Omega Ventura Appollo. Which was the Chevy, Olds, Buick, and Pontiac, respectivley, versions of the Nova.
It is your multifunction switch that has gone out. It is located in the steering column. I used my emergency lights and it blew out brake lights, turn signals, and emergency lights. In newer models Chevy did a recall not so for our older models. Mine is a 1995.
TRY TURNING THE EMERGENCY FLASHERS ON AND OFF A COUPLE TIMES THEN CHECK YOUR BRAKE LIGHTS. WORKED FOR ME.
back, under the car
How do you adjust the emergency brake on your 2001 S10 Chevy?
There is no relay for the tail lights on a Chevy Celebrity.
taking out rear hub asembly on a 2002 Chevy ventura
Check the brake fluid level. If it is ok, take it to a garage that can diagnoise ABS problems.
The 2003 Chevy S 10 emergency brake can be adjusted with the emergency brake adjustment bolt. The adjustment bolt will be on the emergency brake pad.
I have a 1991 Chevy surburan and it has no tail lights and no dash lights, all fuses are good