Replace the lock nuts with new ones.
Rocker is used to adjest the place of brushed
rocker arm stud is pulling out. how can i get it back in
The function of a rocker arm is to control a valve in an engine. The rocker arm is a lever that rocks.
1.5:1
Remove the valve cover. The rocker arm assembly can be removed by loosening the rocker arm screws. Each rocker arm will have a screw.
The function of a rocker arm is to control a valve in an engine. The rocker arm is a lever that rocks.
Each rocker arm has a bushing beneath the rocker arm screw. When the bushing is worn out, the rocker arm will continue to loosen up.
the knock could coe from a few places, if it is in fact a "knock" it could be a piston rod, if its more of a tapping comming from the top of the motor you could have a loose rocker arm, if it is a loose rocker arm i would suggest tightening them up if it stops and comes back i would replace the lifters
A rocker arm shaft is normally a long shaft with rocker arms attached to it, that provides the pivet point for the rocker arms (newer Chevy motors).
No, the rocker arm is not different in a Kia 3.5. The rocker arm is raised and lowered by the movement of the camshaft. The camshaft is what drives the drive cam.
The lifters are made into the rocker arm and are not removable.
The 1985 Chevrolet Corvette rocker arms will have an adjustment screw on top of each rocker arm. Turning the adjustment screw will change the height of the rocker arm.