Evidently there are two drain holes at the bottom of the doors that are designed to allow any water that collects in the doors to drain out. If they become clogged the door becomes a water jug. If the vehicle is parked on an incline and only the downhill drain is clogged, same result until the vehicle is at an angle that allows the other drain to do its job.
There is an already answered question that says "how to remove the Ford Expedition door panel", Search by Ford Expedition and you will find the answer you need.
The door push-pins are suppost to be on the door panel. When ready to install those push-pins are inserted inside the door holes. Push them in until you hear a click. After that reinstall the door handle and srews. exc.
if you take off the door panel there will be three studs that connect the mirror to the door
Remove the door panel by carefully lifting the panel upward to release the retaining clips. Remove the electrical plugs that control the windows, exc. The installation is the reverse of the removal.
To remove door panel you will need a door panel tool or a paint scrapper like tool. You will have to remove some screws around door handle and so. Then you will need to remove door panel by prying door loss around the edges of the door panel. When done with the repairs or anything your doing after removing door panel. Then the door push-pins are supposed to be on the door panel. When ready to install those push-pins are inserted inside the door holes. Push them in until you hear a click. After that reinstall the door handle and screws. exc.
On a 2005 Ford Expedition : In the front passenger footwell , behind the swing out kick panel * the kick panel is the interior trim panel , just ahead of the front door , beside the persons feet
if you take off the door panel there will be three studs that connect the mirror to the door
To remove door panel you will need a door panel tool or a paint scrapper like tool. You will have to remove some screws around door handle and so. Then you will need to remove door panel by prying door loss around the edges of the door panel. When done with the repairs or anything your doing after removing door panel. Then the door push-pins are supposed to be on the door panel. When ready to install those push-pins are inserted inside the door holes. Push them in until you hear a click. After that reinstall the door handle and screws. exc.
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
AnswerRemove one screw behind the panel by the rear view mirror. Pop the cover off the door light. There is one screw in there. There is also a piece of trim by the door handle that will have to be moved away. Then push the panel up and pull off.
On a 2006 Ford Expedition : You will find the fuse box behind the kick panel in the front passenger foot well ( the kick panel swings out for removal ) * the kick panel is the interior trim panel , in front of the front door , by the passengers feet
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.