answersLogoWhite
Cars & Vehicles
Household Hints

Why does a suction cup stop working?

293031

Top Answer
User Avatar
Wiki User
Answered
2011-05-01 23:32:14
2011-05-01 23:32:14

maybe the rubber is worn out

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


When you stick a suction cup on a window you force the air out of the suction cup and you create a high pressure vaccume keeping the suction cup on the window.


Cut a potato, rub the juice on the suction cup. This really does work. I don't know why.


No, a suction cup works by forcing air out of the space between it and the surface it's on. No air = no suction.


I wouldn't want my last suction cup to slip, just as I reach the top of the window. The geckos have a very clever suction cup design of the soles of their feet.


The suction cup will lose its attachment, unless it has an additional adhesive. Suction cups attached to a surface are held there by the pressure of the outside air, which is higher than the pressure under the cup. The suction cup is trying to return to its uncompressed condition, and pulls away from the surface, reducing the pressure under it.


Because rough surfaces prevent the edges of the suction cup from creating a seal, which a suction cup needs to function.


if its just a small suction cup try some meths or kerosine and or dishwashing liquid or cooking oil!


A partial vacuum between the compressed suction cup and the flat surface.


Suction cups stick best to wet surfaces.


You can improve suction it by moisturizing it's edges, this makes it stick to something longer and stronger.


I am looking for a suction cup that uses a motor/ actuator instead of a air compressor. Check out "VERIBOR lever suction cups", I could remove the lever from this and attach an actuator to it, but that would be a very dirty solution. Is there any suction cups on the market that only require linear motion, built to be attached to an actuator? Or is there perhaps a module containing a suction cup attached to a linear actuator?


A remora sports a suction cup on it's head. It will attach to sharks and feed off the algae that grows on their bodies.


The Garmin Nuvi 260 comes with a suction cup mount, power cable, dashboard disc for the suction cup and quick start manual.


get a small pin and pit it right through the plunger. it will release the suction pressure =]


the purpose of it is the stick to things


Sharp teeth and suction cup mouth


The Suction Cup eStore features the world's largest selection of exceptional-quality Made in USA suction cupsin all sizes and types.


A suction cup is named appropriately. The rubber material is formed into a half sphere and once pressed against a solid structure releases air and attaches to the surface.


The liquid wetting the surface forms a seal that holds atmospheric pressure outside the suction cup. With a dry surface, air can leak through scratches and roughness at the interface between the cup and the surface causing the pressure inside the cup to rise to that of the surrounding air. Once the pressure inside the cup equals the atmospheric pressure outside, there is no longer a suction force to hold the cup in place.


A suction Cup will trap air behind itself which causes a partial vacuum. The negative pressure of trapped air or water causes it to keep in contact with the surface it is against.


had the same problem with a suction cup shower corner tray. if you push the suction cup firmly to the tiles it doesn't leave enough plastic thread protruding to screw retaining nut onto. Pushing the suction cup on lightly will leave enough thread but tray will probably then fall off the wall. Poorly designed product.


because it is pushed up to the wall by the atmosphere



it is due to to the pressure and suction of water


I just had change my sand filter and it seem working fine, but it doesn't have enough suction at the skimmers, why it does this?



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.