0
Why does my 1989 2.2 turbo start ok idles ok put in gear still runs no power to pull away any suggestions?
Ak1958
try replacing the fuel filter
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Replaced distrubitor on 95 cirrus car still wont start any suggestions?
Check the crank sensor. I had a 98 cirrus that wouldn't start and that was the problem
What can cause sudden power loss while driving The engine still idles but dies when accelerator is pressed Power is restored after turning ignition off and back on so it can't be the fuel pump?
Has the fuel filter been changed? Also, if it still happens after the new filter, check the fuel pressure.
Why won't my dirt bike start in gear when the clutch is pulled in but it will start in neutral?
It needs adjusted it is still engaging. just like when it is running in Neutral and you put it in first gear it idles down more so than typical of a bike doesnt it ?
2003 poniac sunfire idles up and down replaced the iac sensor and still didnt fix it what to do air leak in between the throttle body and the injecters cant find where its at any suggestions?
A leaky, disconnected or missing vacuum hose can produce the surging you're referring to. Check your tubing.
Why your 1994 Chevy Camaro 3.4L v6 idles high?
it could be the idle speed sensor located on throttle body however i replaced mine and it still idles high. The code indicates lean air/gas mixture so i am still looking for small vacumm leak
Your 95 camaro 34L would barely start and then stall when accelerator pressed engine trouble code indicated EGR Replaced egr and now idles high and still stalls?
clean iac sensor and o ring
94 olds 88-won't start-replaced ICM cam switch crank switch still no fire to plugs any suggestions please?
maybe ignition modual
I have replaced the fuel filter in my 2003 ford expedition and it still doesn't start up immediately any suggestions?
Check the starter, spark plugs, distributer cap, battery.
What does it mean when your car won't start and the security light is on and you have power?
The immobilizer is still engaged.
Why is your 1992 Chevy s-10 4.3 6 clyinder not running rightput new fuel pump in new injectors in iac valve in and it is still not running right any suggestions?
Not sure what you mean by not running right. Is it stalling, skipping, hesitating, idles to fast, idles to slow, doesn't idle at all, backfiring, hard starting, spark knock/ping, running rich, running lean, blowing black smoke, blowing blue smoke, blowing white smoke, etc? Need more info.
Is it the car battery if the headlights still come on?
Yes, but there may not be enough power to start the engine.
My car stalled out and the oil light is on. changed oil still wont start. Its was low on gas also i added some and it still didnt start. any suggestions?
The first thing to check is that you are getting spark at the plug and if your not try changing the ballast resistor on the firewall, it's the white porceloin thing with wires running to it.
