more than likely that the drivers seat has been adjusted and one of the connections between the seat and airbag has not re-connected. you need to visit your local Mazda dealer who will run an ECU check yia a plug underneath the dashboard.
The airbag will not deploy in any situation, emergency or not, while this light is on. please bear this in mind!
The airbag light on a 2003 Mazda Tribute will stay on if a defect is detected in the system. This can include the sensor or the airbag itself which should be immediately repaired.
"What is the gazebo looking dashboard warning light on a 2003 Mazda tribute and why does it stay on for a minute before shutting off when you initially start the car Mazda tribute and why does it stay on for a minute before shutting off when you initially start the car?"
please answer this question - i have the same problem! Thanks
headlight switch is probaly your trouble
Our Tribute is doing the same. Anyone help? It can be the sensor or have the cap checked out. The caps in these go bad. You can replace the cap/container (sold as one unit), or try putting in approximately 1 qt of coolant above the full line (sometimes this works). the floating ball sinks and the sensor goes on to make the light come on there ios a recall for this bring it to your Mazda dealer
because your car is broke
because you have an emmissions problem
it starts but the oil light stay on
You have a problem with the charging system. More than likely the alternator has failed.
Typically the light will remain on if the fluid is low, or maybe the ebrake just pulled just enough that it is on..... or the switch that is triggered by the handle is faulty
Flashing light indicates it is not in 4X4 but is attempting to. light should stay solid when 4X4 is locked in. Are you trying to go into 4lo or 4hi?
Either your handbrake switch is broken and will not turn off or you have low brake fluid.