My Sister-in-law had a simmilar problem, ending up being the ignition switch. trying jigling the key when it starts to cut out.
No, Honda does not make an Accord convertible.
Never heard of a Handa Accord. A 1992 Honda Accord is Front Wheel Drive. Honda does not make a 4wd Accord.
1988 Honda Accords are not near as plentiful as they were a few years ago. But try this site that is offering one right now: http://www.lemonfree.ca/map.php?year=1988&make=HONDA&model=ACCORD&loc=.
get an h22 you cant go wrong that's what i have right now in the same car make sure you get a h22 that's obd2 not obd1
Honda Motor Company. The American sold Accord is built in Marysville, Ohio.
Not likely as these are two different generation Accords but not positive. Call your local salvage yard or Honda dealer to make 100% sure.
Depends on what you are trying to accomplish.
No, only 4 cylinders and a V6.
in the tank no need to replace,i am a Honda tech.AnswerIt is located under the right wheel well on the 99 accord. It is hard to get to so I chose to take it to someone else to get an oil change. AnswerAnswer does not make sense for the question asked.
Favor de Google Honda Accord 1992 e visitar OS sitios, especialmente o seguinte: http://autos.msn.com/research/vip/Reliability.aspx?year=1992&make=Honda&model=Accord.
To install a stereo in a 1985 Honda Accord, make wire to wire connections using either a solder iron and electrical tape.
May be you have a misfire?
It is located under the right wheel well on the 99 accord. It is hard to get to so I chose to take it to someone else to get an oil change. Answer does not make sense for the question asked.
( Yes ) , the 2.2 liter - 4 cylinder engine in a 1993 Honda Accord ( IS an interference engine ) according to Gates ( they make timing belts etc . )
Yes ( according to Gates - they make timing belts etc , the 3.0 L - V6 is an interference engine in your 2003 Honda Accord )
Fit, maybe, but run correctly no. The 1993 is OBD1 & the 1996 is OBD2. Look for a 1996 engine and make sure you get a VTEC if that is what the 1996 is equipped with.
The recommended tire pressure for the 1997 Honda Accord is 32 PSI. Drivers are encouraged to make sure their tires are adequately inflated to reduce fuel consumption.
Remove the muffler
To do a valve lash on a 2003 Honda Accord make sure a lash gauge is on hand. Valves lashes adjust the valve to piston clearance on cars. Be sure to use the appropriate specifications of clearance for the 2003 Accord.
CB7 is the chassis code found within the vin number on 1990-1993 Honda accord models, and used as lingo in the import tuning scene to refer to this particular make and model of that year.
The Kicker 08DS12L72 will certainly fit in your Honda Accord, but older models may make it a tight fit.
Honda makes no V4. They do make an Inline I4. The hp depends on the year you are asking about which you fail to mention. The 2011 Accord 2.4 liter I4 puts out 177 hp.
Fram oil filters are really good and will fit just right. Just about all filter manufactures make a filter that will fit on your Honda. I have owned 4 Honda Accords and use nothing but Purolator oil filters.