what type of car. ck for any thing that might be dripping on p/s belt. ck for water pump dripping coolant on p/s belt...... if not, try flushing system if fluid doent look clear. worked? ccol. if not< replace pump but check operation of rack and pinion
I a 97 pick up and the power steering pully is pressed on and pressed off
Remove the power steering pump hose. Remove the power steering pump belt. Remove the power steering pump retaining bolts. The power steering pump will come off.
The power steering of Mercedes A Class can be reset by switching off the engine and starting the car again. The power steering fault is quite common in Mercedes A Class and this is either power steering intermittently working, not working at all or operating all the time even when engine is OFF. The last catagory drains the battery. if the power steeering does not work at all then you there may be blown fuse Number 48/49 under the driver foot in the battery compartment. Or it could be due to correded/ broken conections under the washer resevoir or fault in the alternator not producing enough power in the blue wire which enable the power steering. Merc doctor
Begin by removing the hose from your power steering cylinder. Remove the power steering cylinder retaining bolts. The power steering cylinder will come off.
Loosen the tensioner pulley. Remove the power steering belt. Remove the power steering hose. Remove the power steering retaining bolts. The power steering pump will come off.
You can't. The power steering is driven by the motor. If the motor stops, there is no power assist for the steering.
Normal power supplies are on all the time while switching type are on and off periodically which results in precise control and improved efficiency.
Begin by removing the belt from your 1994 Chevy Suburban power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. The power steering pump will come off.
Its has HydraBoost Braked, operates off the power steering pump.
It might be because you need to charge it. I got a camera before and it kept switching off because it wasn't a very good make.
To change a power steering belt on a Rover 214, unbolt the power steering pump and pry the belt off the pulley. Replace with another steering belt and reinstall the steering pump.
If you do not keep your power steering fluid topped off, and/or do not change it once a year, your steering column will most likely start burning from friction of the steering rod and column. The best thing you could do is take it to a mechanic, to see how much damage you've done by not topping off your steering fluid. This is something explained in every owner's manual, but not often read. This is how most mechanics make their money, by people not topping off their power steering fluid. If it isn't looked at soon, then your steering could go out, and you could crash.