0
The problem could be a dirty sensor or the sender is no good.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
Why does my 1994 Chevy truck temp gauge not work?
could be a bad sensor a bad gauge or a broken or disconnected wire
Can a temp gage go bad on a Mazda b3000i replaced the temp send unit and the temp gauge still doesnt register the fuses look goodim stumped?
change your thermostat....
Why doesn't my RPM gauge and temp gauge work?
why doesn't my rpm gauge and temp gauge, fuel gauge not work
My 1994 camaro z28 temperature gauge doesn't work?
Bad gauge and/or coolant temp sensor The coolant temp sensor doesn't control the gauge. There is a sensor in the head on the driver's side that controls the gauge. It is fairly easy to get to, probably one of the only things on a 4th gen. lol
Why doesnt your temp gage work on your 1992 camaro rs?
Your temp gauge is a very simple circuit with few things to go wrong. Your temp sensor may be bad, the gauge maybe bad, or the connecting path may be bad. Sometimes if you have taken the gauge pack out, it does not seat right when it is reinstalled. The connection inside the dash is all pressure and prayer.
Why is the temperature gauge not working on my n13 I have replaced the cluster unit still the temp gauge doesnt work.I have replaced the thermostst and the sender unit...?
that is rather unusual i would ask the dealership you brought it from and ask them and then go from there. Some vehicles have two temp sending units, one for the temp gauge and one for the ecm. The one for the gauge generally has one wire going to it, the one for the ecm may have two wires going to it.
Prelude temp gauge?
1996 prelude temperature gauge reads low temp
How do you fix a temp gauge on a 1998 ford contour?
temp gauge is stuck on hot
Why my Water temperature gauge doesn't work on 95 explorer?
only 3 reasons a temp gauge wont work the temp sender is bad the gauge is bad or the wire from temp sender to gauge is broken
How to fix temperature gauge on 1993 suburban?
Are you sure its the gauge? A quick easy test is to ground the wire to the block. The gauge should sweep to HOT and peg. If it doesnt then the gauge cluster has to be replaced. Not real sure if you can purchase just the temp gauge in the cluster though. I think it comes as one complete package. This would require some dash removal. Not dificult but time consuming. If you want to go the cheaper route you can always mount a separate temp gauge.
Temp gauge on 1994 g20 stopped working it seemed to always be on the low side van runs fine bought last year wire is secure to the sensor haven't pulled dash panel to check gauge yet ideas?
You can check the temp. gauge operation by removing the temp. gauge sending unit plug and touching it to any engine ground with ignition on but the Van not running. The gauge will go to hot right away, if it is working. The temp. gauge sending unit is located on the drivers side of the engine at midpoint just below the exhaust manifold. It will have a single wire running to it and be plugged into the sending unit.
What does the check gauges light mean on a 1994 Chrysler LeBaron?
It means that one gauge is not in the safe zone. Check the engine temp, oil pressure, battery/alternator voltage,It means that one gauge is not in the safe zone. Check the engine temp, oil pressure, battery/alternator voltage,
