answersLogoWhite

0


Best Answer

If its not coming from underneath the water pump, (the weep hole) it sounds like it has frozen and pushed out one of your freeze plugs, or the block has cracked. Sure hope it ain't the latter.

I've been a little slow on the draw lately so I'm sure you've gotten plenty of help from our capable buddies out there. Good luck and let me know how it goes hoop_hoop

And you might have a broken hose or a loosed clamp. Because water just do not pour out from your engine.

it also could be a frost plug but ill bet its the block heater has come out

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why is there water pouring out of engine on my 1992 ford f-150?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the oil pump located on a 1992 f150 xlt?

The engine oil pump is INSIDE the engine oil pan


Why does the engine stay with raised rpms on a 1992 f-150 351 cid engine?

the rps stay up between 1300 and 3000 on my 1992 ford f150 4x4 5.8l engine. why


Were is the PCV valve on a 1992 f150 with the 5.0 in it?

where is the pcv valve on a 1992 f150 with 5.0 liter


Does a 1988 F150 have a water shutoff to the heater core somewhere in the engine compartment?

No


What is the curb weight on a 1992 ford f150?

The 1992 Ford F150 light-truck came in multiple engine and trim options. The base regular cab (two wheel drive) with the manual transmission had a curb weight of 3741 pounds.


Firing order on 1992 F150 4X4 351 Windsor engine please ty?

Firing order on 1992 F150 4X4 351 Windsor engine 1-3-7-2-6-5-4-8 _________ Block cylinder Front 1 2 3 4 Diagram 5 6 7 8 Back of engine __________


Does a 1992 ford f150 have a torsion bar?

NO


What is the Firing order for 1992 F150 5.0?

1992 ford f150 firing order --------------------------------------------- 1 - 5 - 4 - 2 - 6 - 3 - 7 - 8 The distributor rotor turns COUNTERCLOCKWISE The distributor cap is installed with the # 1 position facing to the rear and slightly towards the drivers side of the engine


Where is the crank sensor on a 92 f150 4.9?

The 1992 Ford F1 50 pickup truck 4.9 liter engine crankshaft sensor can be found on the back of the engine. You will to remove the rear engine cover in order to access the sensor.


Where is the water temp sending unit on a 1992 ford f150 4.9 located?

On the passenger side, way back, under the exhaust manifold.


Will a 1978 351w fit in a 1990 f150?

what carbutor model engine fit in a 1994 ford f150 with a 5.8 lighting engine


Will an 2005 f150 engine computer and wire harness and engine work in a 1999 f150?

i seriously doubt it. there have been several engine modifications to the the Triton v8s since 1999.