Why is your door open light and footwell lights still on even when driving a Ford Focus?
Because on the door open light is a switch which says " on-off-door". Apparently yours is in the "on" position which will, in time, run your battery down.
The new Polo (2011) does not have "Daytime driving lights". It is fitted with "Permanent driving lights". The lights on cars with Daytime running lights can be switched off by using one of the stalks on the steering wheel, or by removing a fuse (daytime driving lights are on a seperate light circuit) Permanent driving lights cannot be switched off. If hte fuse is removed it will disable your headlights and backlights altogether. The only…
Fog Lights, but they usually use 2 versions of fog lights. A "pencil beam" and "driving Light". That is why they usually have 4 extra lights 2 of each. The Pencil beam is a direct narrow beam used to see farther down the road and a driving light is a wide beam to see the sides of the road directly in front of you. A commonly used rally fog light is made by HELLA
When you turn the lights on in your 88 new yorker why do all your gauges that tell you about speed and what not they all dim and when you turn your lights off they get brighter?
If you're driving a car at the speed of light and you turn the car lights on would they do anything?
The lights will automatically turn off in the day time. Automatically turn on at night. they are controlled by a light sensor, it determines if you need the lights or not. If the lights go on and off randomly not matter what the light conditions are, you may need to have a mechanic check out your light sensor.
Why would driving lights not work and all warning lights in instrument cluster go off and on when driving in a 1997 Sunfire?
Why1998 S-10 gauge lights come on while driving seems to lose power Goes out security light stays on?
Can Piaa 510 fog lights be installed into the existing positions where the factory fog lights are installed on a 2005 Ford Escape?
The PIAA 510 fog lights are not the proper size to fit in the front bumper fascia where the factory fog lights are mounted. Additionally, there is no mounting point on the Escape to hold the PIAA 510 fog light. The PIAA 510 has a universal design that allows for mounting on a vehicle with enough clearance for the size of the light. It is ideal for newer vehicles that were manufactured with bumper light…
I have a 99 Grand Cherokee and the driving lights are turned on by pulling on the button located at the top of the head light switch on the left side of the column, Note that the driving lights will only work with the low beams and will turn off when you switch to high beams. If you search the net you can find a way to have the driving lights and high beams on…
In your driving test when asked how do you know if your indicator light are working what is the answer?
Why would the brake lights tail lights and turn signals not work on your 1985 Volvo 240 if emergency flashers are operational and fuses and bulbs are good?
How do you repair a tail light of a Mitsubishi eclipse 1996 that is not working when you turn on the headlight but works when you brake?
Here are some terms: par(like golf)- light gel- color on light gobo- goes on light and projects image board- lighting console dimmer- what actually dims the lights pigtails- plugs the lights in hoist- a bar that raises and lowers the lights cue- a certain change in lights catwalk- a platform above the stage where lights are hung remote focus unit- a handheld device that performs common tasks on the console remotely Hope this helps!!
Brake light adjustment on a 89 jeep Cherokee brake lights only come on when i have breaks right to the floor?
Do I have fog or driving lights on an early 1996 Peugeot 106 xs and why do they only come on with full-beam not main or dipped?
The answer is in your question, Fog lights are just that, lights that can be switched on in the fog, Driving lights are lights used to assist the driver when thay need more light (when full beam is selected). Answer ive got the same model & the fog lights are switched on using full beam...i just wired in my own 12v feed & attached a switch ;)