answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Why mixed glycerin in assy of boric acid?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Chemistry
Related questions

What is a light assy?

Assy is short for assembly.


What does Assy mean?

Typiically "Assy" is short for "Assembly"... as in "Sub Assy" means "Sub Assembly"


For serving the vacuum sensor assy?

sensor assy vacuum


What is the duration of Assy McGee?

The duration of Assy McGee is 660.0 seconds.


What is the abbreviation for the word assembly?

The abbreviation for assembly is assy.


How does the heater core for a 1968 Chevy 2 Nova come out?

when i removed the heater for my nova i had to disconnect the cables and wires from the heater assy and on the engine side of the firewall remove the nuts holding the assy to the firewall that allowed the whole assy to come out from under the dash then i dissassembled the assy and the heater core was bolted into the assy on the ends hope this helps


Who created ARPANET?

ASSY


How do you replace a fog light bulb in 1993 300zx?

remove the side marker light assy Phillips screws, the assy will slide out. you then have access to the three 10mm bolts holding the fog light assy in. remove then and push out the fog light assy. then remove the four Phillips screws from the corners of the fog light to separate the assy. then change the bulb and put back together


What is the abbreviation of assembly?

assyUsually Assy


Why does the primer bulb on your toro snow thrower go flat?

There is an orifice in the primer assy. in the carb. that is plugged. You will have to remove and clean the primer assy.


How do you replace 1998 dodge Ram tail light?

lower the tail gate on the truck. there will be 2 torqx head screws removed the screws it will loosen the inside of the tail light assy... pull on the tail light assy strait back. the light assy should come out turn the bulb casing on the back of the light assy and pull the bulb out.


How do you change the front signal light bulb on a 1997 Pontiac Grand Am?

On some, you can get to the back of the light assy and take the bulbs out. If not, the assy has to come off