remove the side marker light assy Phillips screws, the assy will slide out. you then have access to the three 10mm bolts holding the fog light assy in. remove then and push out the fog light assy. then remove the four Phillips screws from the corners of the fog light to separate the assy. then change the bulb and put back together
lower the tail gate on the truck. there will be 2 torqx head screws removed the screws it will loosen the inside of the tail light assy... pull on the tail light assy strait back. the light assy should come out turn the bulb casing on the back of the light assy and pull the bulb out.
On some, you can get to the back of the light assy and take the bulbs out. If not, the assy has to come off
The parking light is in the headlight assy.
Remove the securing Phillips head screw on the lamp assy. to be removed. The light assy. also has a hidden securing plastic stem and rubber grommet which goes dry behind the light assy. Gently pry light assy. out. If possible spray WD-40 from the engine compt. side first to try and lubricate the rubber grommet. When lamp assy. is removed you can then replace the lamp by undoing the plug at the rear.
They screw in from the back. Sometimes the light assy has to be removed.
Take the light assy off.
The light assy has to be removed and the bulbs removed from the back.
I tried to replace the Bulb in my 2003 Corolla but I couldn't get to the bulb how do you unscrew the rear light assy.
The light assy has to be removed to take the bulbs out.
remove the light assy from the car.
The light assy has to come off and there a couple of screws you get to from inside to remove the light.