0
Something is broken, bent, collapsed, or out of adjustment.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you take your lifters off the rocker arm 2006 dodge 3.5?
The lifters are made into the rocker arm and are not removable.
What is the function of a rocker arm?
The function of a rocker arm is to control a valve in an engine. The rocker arm is a lever that rocks.
How do you remove the rocker arm assembly in a 1975 nova?
Unscrew the nut on top and lift off the rocker and swivel.
What is rocker arm backlash?
That is the gap between the rocker arm and valve stem when the valve is on it's seat and the cam is off the lobe. This would only apply to solid lifters.
How do you Remove rocker assembly on 95 sonata?
Remove the valve cover. The rocker arm assembly can be removed by loosening the rocker arm screws. Each rocker arm will have a screw.
What is the function of the rocker arms?
The function of a rocker arm is to control a valve in an engine. The rocker arm is a lever that rocks.
How do you check a rocker arm on a 2000 Jeep Grand Cherokee Limited with a 4.7 V8 engine?
Rocker Arm problems, specifically with them falling off, are common with 2000 JGC's. You can get the code read, which will point to the cylinder that has the failed rocker arm and then remove the left or right rocker cover to inspect. The problem with the falling off rocker arms tends to be a slippage of the valve guides that leaves the valve to hang up and removes the stress from the rocker so it just falls off. Replace the heads. Replace the HEADS? Sounds drastic. How about repairing the heads?
How do I repair a rocker arm on a 1993 Grand Am?
v6? no matter what engine all you have to do is take off the valve cover, find the bad rocker, take the bolt off that holds it on. now do opposite of removal. get the rocker arm torq specs from your local parts store. its free. no retiming required
Why do your rocker arms keep wriggling loose after you tighten them 350 rocket?
Each rocker arm has a bushing beneath the rocker arm screw. When the bushing is worn out, the rocker arm will continue to loosen up.
Why does the rocker arm i.e. roller follower pop off the cam on the Dodge Spirit I original put back on and it poped off again.?
Could be that its just a defective rocker arm... either if its the original it could be damaged, or if its new, just defective
What is rocker arm shaft?
A rocker arm shaft is normally a long shaft with rocker arms attached to it, that provides the pivet point for the rocker arms (newer Chevy motors).
Is each rocker arm different in a kia 3.5?
No, the rocker arm is not different in a Kia 3.5. The rocker arm is raised and lowered by the movement of the camshaft. The camshaft is what drives the drive cam.
