Sounds to me like the turn signals and the heater fan may be on the same fuse?? Jack
The problem that I had with my 2001 Ranger rebuild was I had tail-lights and back up lights along with brake lights. No turn signals or hazard lights. More than likely, it is a bad turn signal control arm. There is also a relay box under the dash. My problem was that the relay had gotten wet and had rusted inside. As soon as we replaced this, I had turn signals and hazards. Hope this gives you a reference where to start your search. Good Luck, Dan
take out the bulbs and see if they are burned out.
replace the heater core if that's not it start checking fuse
Hitch the trailer. Connect the lights. Start your car or truck. Turn the turn signal on. Get out and go behind the trailer. See if they blink. Repeat for the other side.
You have to start by checking the bulbs or the flasher I think it may be the flasher.>>>>>>>>>>>>>
Its Probably your battery. I Happened to my 1996 Ford ranger xlt supercab when i left the lights on at school on day. Hope this helps
Your owner's manual will list possible problems that such a signal can indicate. In addition be sure you did not accidentally turn the hazard lights on.
As soon as you start the vehicle ( and parking brake is released) they automatically come on (Helpfull)
If all the running lights (front & back) are not working I'd start by checking the fuses then onto the headlight switch
no they won't start again. why u ask? because they hate u! get a new car!
"http://wiki.answers.com/Q/The_air_condition_panel_lights_flashes_for_about_20_minutes_when_you_start_the_car_you_can_not_use_the_air_condition_but_you_can_use_the_heater_also_the_harzard_lights_will_not_work_what_is_wrong"
you need a new ignition tumbler.