There is a front pulley, a center bolt and washer AND a spacer behind the washer that has to come off before putting on the puller. I didnt know this and tried to pull balancer, this spacer is pressed in or it was after i tried to pull balancer off over it !
With a balancer puller tool. With a balancer puller tool.
With a harmonic balancer puller.
The harmonic balancer does require a puller if that is what you are asking.The harmonic balancer does require a puller if that is what you are asking.
use a harmonic puller
A puller is best .
A puller is best .
Go to Autozone and tell them u need a harmonic balancer puller
loosen the center bolt and get your self a harmonic balancer puller just make sure you loosen the center bolt enough but not too much but you need a balancer puller.
You need a harmonic balancer puller, and a 1/2 in drive inpact wrench.
On most newer cars, the crank pulley is one piece with the harmonic balancer.... Remove it with a harmonic balancer puller.
You need a balancer puller to remove it , It don't just slide off.
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.