COULD HAVE BAD FUEL LEVEL SENSOR OR IF IT DOSE NOT HAVE SENSOR THE SENDING UNIT ON THE MODUEL IS BAD AND THE WHOLE MODUEL NEEDS TO BE REPLACED.
The check gauge light on a 2000 Chevy blazer could be several things. The oil could be low or the other fluids may be low. Take notice of all the gauges. One or more may be out of its normal parameter notifying you there is a problem.
Yes, if you can find a place to mount it.
gas gauge sticks either full or empty This is a known problem with Chevy's that they will not recall on. I had same problem with my 2000 Blazer. Had to replace fuel pump / gauge assembly in tank. It took a couple of hours to do, but was worth the headache having a gauge that works now, No more running out of gas or watching mileage.
An alternator from a 2000 Chevy blazer will fit a 2002 S10 blazer with a little fabrication.
Yes, a 2000 GMC Jimmy hood is compatible to a 2000 Chevy Blazer. This is only on the S10 Blazer though.
It does not have one. You can not use a timing light on that year engine. The timing is computer controled. You MUST have an engine scanner to set the timing.
Anywhere as long as it is not in either extreme position, Remember gauges are just an indicator and not "gospel"
Yes. I own a 2000 Chevy Blazer.
How do you set the timing on a 2000 Chevy blazer (V6)
The 2000 Chevrolet Blazer passenger side kick panel is held in place by eight retaining bolts. Remove the retaining bolts and the kick panel will come free.
It will as long as the 2000 had a 4.3L in it too.
The 2000 Blazer with the 4.3 engine has one coil.