You have a vacuum leak somewhere, a problem with the idle air control valve, or carbon buildup on the throttle plate.
Rick
I'm a retired ASE Master/L-1 Technician. I still keep current with the latest automotive technology. Visit my blog for cool articles and TSB's: http://free-auto-repair-advice.blogspot.com
what would cause a no start condition when engine spins in a 95 taurus sho 3.2l
The year and engine size would help us help you.
about 20000
More than likely it would. Check to make sure the engines are the same size and it should fit.
The spark plug gap for a 1990 Ford Taurus 3.0L engine should be set at .044 inches. A 4.2 liter engine would have a gap between .052 and .056 inches.
why is there squeek noise when starting and then goes away when engine warms up
I would use 10W30 in the engine
In a 1999 Ford Taurus : The 3.0 liter " Vulcan " V6 engine which is an overhead valve / pushrod design would have cast iron heads The 3.0 liter " Duratec " V6 engine would have aluminum heads
The traction control shouldn't affect the break system. The operation would only be affected by warmed rotors or bad calibers.
The 2005 Ford Taurus Owner Guide shows to use ( 5W-20 engine oil ) * that would be all year *
I believe that would be the 3.2 liter DOHC V6 engine that was used with the automatic( from 1993 to 1995 inclusive ) unless you mean the 2010 Taurus SHO with the 3.5 L -V6 - twin turbo engine
It will fit into the engine bay, but the wiring is different from early model third generation Taurii to late model third gens, so an electrical conversion would be required.