Parking brake not fully released?
Defective sensor?
The fluid for the clutch comes from the brake fluid. After the brake master cylinder, there is a clutch master cylinder which takes fluid from the brakes. Fill up the Brake master cylinder.
enough to fill the master cylinder
Look to see where you fill the brake fluid and where your filling the brake fluid that is the master cylinder.
A brake master cylinder? If you are losing brakes or brake fluid.
Good time to replace all the brake fluid. Remove the brake lines from the Master Cylinder and pump the master cylinder dry. Add fresh brake fluid from an unopened can and bleed the master cylinder. Reinstall the brake lines and then bleed all brake lines until you see clean fluid. Keep adding fluid to the Master Cylinder until you are done.Good time to replace all the brake fluid. Remove the brake lines from the Master Cylinder and pump the master cylinder dry. Add fresh brake fluid from an unopened can and bleed the master cylinder. Reinstall the brake lines and then bleed all brake lines until you see clean fluid. Keep adding fluid to the Master Cylinder until you are done.
There is no fluid in the clutch....The clutch master cylinder takes DOT 3 brake fluid. It is the same fluid that you put into the brake master cylinder
master cylinder
If non brake fluid is added to the master cylinder, possibly.If non brake fluid is added to the master cylinder, possibly.
The clutch gets its fluid from the master brake cylinder reservoir. The master clutch cylinder sits just below the master brake cylinder reservoir and is fed fluid by gravity.
Generally brake fluid.
Master cylinder empty (no brake fluid) Leak in brake line or wheel cylinder Defective master cylinder
Master cylinder, is the brake fluid reservoir. It is mounted on the brake booster, on the firewall, driver's side.Master cylinder, is the brake fluid reservoir. It is mounted on the brake booster, on the firewall, driver's side.