0
Why would the turn signals and tail lights work but not the brake lights or flashers after installing new flasher bulbs and fuses on 1986 Ford F150 truck?
Wiki User
∙ 17y ago
Try replacing the hazard flasher. If that does not work, double-check to see that you have the proper bulbs and fuses installed for the brake lamp circuit.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
What would fix emergency 4-way flasher in a 98 VW Jetta TDI when the outside lights won't flash but the red indicator light on the module lights up steadily and turn signals are normal?
4 way flashers and turn signals both have a "flasher can" in the system to make the lights flash the turn signal and 4 way flashers are controlled independantly of each other try replacing the flasher can for the 4 way flashers it is obvious that the bulbs are ok because they work on turn signals
Why would your hazard lights work but both turn signals do not work on a Chevy s10 pickup?
hazards and turn signals have separate flashers. replace flasher for turn signals
Why do emerg ency flashers work and the turn signals wont blink on 97 f250?
The emergency flashers and the signal lights are separate systems. Each has it's own fuse, switch and flasher relay. If your turn signals light up but don't blink I would blame the signal flasher relay.
Ford f 250 Hazard lights work but turn signals do not?
Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher you need to replace the blinker flasher unit it is different from the hazard unit they cost about 4 bucks the flasher unit is the big round thing in the fuse panel in the dashboard
If the hazard flashers on a 1985 Dodge 6 SE work but the turn signals don't what would be the problem?
Flasher relay bad. This is a separate flasher relay from the one controlling the hazard lights.
You have an 1991 dodge shadow es with a 5 speed trans your problem is that you have no turn signals your head lights brake lights and flashers work no turn signals you changed all light bulbs an fuses?
Probably the turn signal flasher
2000 Kia Sportage turn signals and flashers not working?
The flasher relay is more than likely defective. One flasher controls both the turn signals and the hazard lights. It is located on the driver side, behind dash, mounted above kick panel.
Hazard lights out on 1992 GMC Sierra Signals work brake lights work could it be a relay If not what else?
Fuse or 4 way flasher unit there are 2 flashers on for turns one for 4 ways
Ford econoline flashers work but no turn signals?
Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one.Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one.
I Replaced flasher why don't the signal lights won't work?
Some cars have two flashers, one for the signals and the other for the emergency flashers. Be sure you replaced the right one. Also check the fuse the bulbs and lastly the signal switch.
What is the flasher box in the Mazda mx3?
The flasher box in the Mazda MX3 is the plug in that controls the flashers for the turn signals and also the hazard lights. This part is located under the dash on the driver's side, just above the brake pedal area.
What would cause the turn signal lights on a 1992 Explorer to light up but not flash The emergency flashers work but the turn signals will not flash?
either a bulb or the signal flasher relay located on the fuse panel usually opposite the hazard flasher relay
