0
Why would the turn signals work but not the brake lights on my 2003 Chevy Traliblazer?
Wiki User
∙ 15y ago
Check all of the three bulbs try replacing with working bulbs this should resolve the issue unless you have a bad module.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Does a 1990 Chevy scottsdale have a relay switch for turn signals and brake lights?
It has a flasher relay for the signals only.
Where can you find a diagram of brake system for 1986 Chevy pickup?
i have tail lights but do not have brake lights nor do i have turn signals. i have replaced brake switch and all bulbs
1995 Chevy lumina LS tail lights and turn signals work but brake lights are interminent?
Its the steering colum
Why are your brake lights and hazard lights not working on a 99 Chevy turn signals and top brake light is working fine?
turn signal switch needs replaced!
What would cause my Turn signals and brake lights do not work on a 2000 Chevy cavalier?
have you checked your fuses?
1994 Chevy silverado all 3 brake lights and tail lights don't work but signals do?
if the tail lights work but not brake lights then its most likely just a blown fuse or it could be the switch at the top of your brake pedal arm.
Why do the turn signals stop blinking when the brake is applied in a 1989 Chevy pickup?
If the vehicle is equipped with a trailer light plug, the wires for the brake lights and the turn signals have been connected together, which is common, as many trailers do not have separate lights for brakes and turn signals.
Why would brake lights not work on 2002 Chevy Suburban when fuse switch and bulbs are good?
No brake lights but turn signals work? Turn signal switch brakes route through it.
Where is the brake switch for 1996 Chevy Lumina?
turn signals work butt the brake lights dont can anyone help please? cant afford a mechanic.
What would cause your turn signals and brake likes to not work on your 1996 blazer?
It is your multifunction switch that has gone out. It is located in the steering column. I used my emergency lights and it blew out brake lights, turn signals, and emergency lights. In newer models Chevy did a recall not so for our older models. Mine is a 1995.
Why don't your brake lights work on your Chevy s-10?
You may have blown a fuse. You may have to replace your brake light switch which is located above the brake pedal under the dash. Also it could be your emergency flasher knob if its broken. All of your turn signals and break lights run through it and if the connections on it are off none of the brake lights and turn signals will work.
My brake lights or turn signals don't work on my Cadillac deville?
How do you replace brake lights
