0
If you are trying to get a screw to stay on the screwdriver blade when you can't reach in with your fingers to start the screw. Soap or wax can also be applied to a wood screw's threads to get it to screw into hardwoods more easily. Beeswax is traditionally used by carpenters.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How can screw driver improve our lives?
A screw driver is really useful! It can really improve our lives a lot. Example When your home's screws have loosened, you can use a screw driver to tighten it for safety. You can put something on the wall with screws and you can tighten it up with a screw driver. This is why people call it Mr. Fixit. Really useful and important in our lives!
Is screw driver one word or two?
two, two words put together
What is a disadvantage for a screw?
The disadvantage of the screw is you have to put greater distance.
How do you replace faucet handle to shower?
Take the end cap off, unscrew the screw in the handle, take off handle, put exact same new handle on, screw it down, put cap back on.
What chemicals are used in the modern soap making industry?
Same way it always was: fat and lye. However a lot of "soaps" these days contain no soap, they are detergents.
How do you eat corn in under 10 seconds?
attach it to a screw driver and then put it in your mouth while the screw driver is on high
What is the force you put on a screw driver called?
i think the output......................
How can screw driver improve our lives?
A screw driver is really useful! It can really improve our lives a lot. Example When your home's screws have loosened, you can use a screw driver to tighten it for safety. You can put something on the wall with screws and you can tighten it up with a screw driver. This is why people call it Mr. Fixit. Really useful and important in our lives!
Is screw driver one word or two?
two, two words put together
How do you bust an ignition?
Put a blade screw driver in and hit it with a hammer best way
How do you make a light bulb easier to screw in?
an electrician told me to try soap, like a bar of dial soap. I use the little soaps you get from hotels because they are small and free. Dont put anything that is conductive because you can really screw things up if it drips. Just rub soap around and it will help it screw in and out without causing problems.
How do you replace the passenger window switch 1992 corvette?
Very careful pry it out with a small thin flat head screw driver, put tape on the screw driver to keep from scratching the surrounding area
BMW 323 How do you take out the ignition?
there is a black ring around the egnition where the key goes in. put a flat head screw driver behind this using a wedge affect and pop it off. when this pops off put the flat heaD SCREW DRIVER ONTO THE EGNITION WHERE THE KEY WOULD GO, AND TILT IT DOWN AT THE SAME TIME SLIDE THE BARREL OUT.
How do you release the bonnet of a Ford Granada Scorpio 1988 if the release does not work?
with great difficulty a long screw driver up past the rad or mole grips on the cable if it still attached to release bit of bonnet find another and look where you need to put screw driver would help
1994 Legacy which is making a whining noise and a if you lift the bonnet there is a burning hot metal kind of smell around the power steering alternator?
It could be a bearing in your alternator that has gone out. Start your car and do whatever it takes to reproduce the sound. When the vehicle is making the sound, put a screw driver against your alternator and put your ear against the other side of the screw driver. If you hear the whining noice clearly through the screw driver, it's probly the alternator. Move the screw driver around the area and see if the noise that is passed through the screw driver is louder anywhere else, besides the alternator. If not, it's coming from your alternator. You can use a long screw driver or any solid piece of material, but the handle of a screw driver is a little more comfortable against your ear than other options.
How do you remove the cocking bolt from long strike cs-6?
Take a flat-head screw driver and put it between the bolt handle and the gun. Push down on the screw driver to push the bolt away from the gun.
How do you remove the front brake rotors on a 2002 KIA Spectra?
once the wheel is off you may see 2 screws those have to be removed before you get the rotor off, i suggest buying a impact screw driver ($20-30), put the right size bit on the driver and hit the back of the screw driver with a hammer while turning the screw driver counter clockwise if it doesnt come off you can hit it while turning the driver clockwise to help loosen the screw then clockwise once those are off the rotor comes out
