you need to "write protect" your floppy disk.if you turn the floppy disk over you will see a little tab on the lower right hand corner,push this tab down until you can see the hole through it.your disk is now write protected and cannot be overwritten.
Most modern laptops do not have space for a floppy drive internally, so this is impossible on them. If you have an old laptop that has space for a floppy drive internally, it probably already has one so you don't need to install one. However if that existing internal floppy drive has failed you will have to replace it (assuming you can find a floppy drive to replace it with). To replace the existing internal floppy drive you will need the manufacturer's documents on how to open the laptop's case, get access to the floppy drive, and swap out the old one and replace it with the new one. This will almost certainly require special tools (e.g. torx drivers, wrenches) that you don't already have and will need to buy if you don't already frequently do such work.
Because floppy drives (like CD-ROM drives) are very inexpensive. It will cost you $10 at the high end for a brand new floppy drive, just asking a technician to look at your floppy drive could cost more than that.
The floppy disc drive was invented at IBM in 1967. It used 8" floppy discs. The first floppy disc drive in an IBM personal computer appeared in 1981. By this time the original 8" floppy disc had been replace by a 5.25" disc.
Failed FDC means that the Floppy Disk Controller is no longer responding. Possible solutions to this issue are to replace the FDC (not so easy on integrated MBs) or possibly replace the floppy drive. This can also occur when the ribbon cable connecting the floppy drive is not inserted correctly.
Hard Drive:Possibly because your filesystem is broken or corrupt. TO FIX: MUST HAVE WINDOWS INSTALL DISK/RESTORE, THEN REINSTALL, MUST HAVE ACTIVATION KEY FOR REINSTALL! CD/DVD DRIVE: WORN OUT DISC, BROKEN CD/DVD PLAYER, CORRUPT/BROKEN OR NO FILESYSTEM, NO FILESYSTEM AS IN YOU NEED TO FORMAT THE DISC OR REPLACE YOUR CD/DVD DRIVE OR REPLUG IDE PLUG. FLOPPY DISK:NO FLOPPY IN DRIVE, BROKEN/DAMAGED DRIVE, CORRUPT OR UNFORMATTED DISK, UNPLUGGED IDE ON MOTHERBOARD. FIX: FORMAT FLOPPY, REPLACE FLOPPY DRIVE, PUT FLOPPY IN DRIVE. Disk read error is because your Harddisk's/CD/DVD drive/Floppy Drive is broken, corrupt, missing, unformatted or unplugged.
By buying a floppy drive. You can buy an external USB floppy drive for under $50.
THE FLOPPY DRIVE THE FLOPPY DRIVE
1. Yes, you can remove a floppy drive. 2. Yes, Windows 95 supports USB (only certain versions, actually). 3. No, you cannot connect a USB hub to the floppy controller.
The OS is a program. The computer has the floppy drive.
Typically, the A drive is the floppy drive; the C drive is the hard drive; and the D drive is the CD drive.
in a floppy drive, a small pin hits the area where that little switch is on the floppy. if it passes through, the floppy drive detects the floppy as write/read. it it doesn't pass through, the floppy drive detects the floppy as read only
Hard Drive:Possibly because your filesystem is broken or corrupt. TO FIX: MUST HAVE WINDOWS INSTALL DISK/RESTORE, THEN REINSTALL, MUST HAVE ACTIVATION KEY FOR REINSTALL! CD/DVD DRIVE: WORN OUT DISC, BROKEN CD/DVD PLAYER, CORRUPT/BROKEN OR NO FILESYSTEM, NO FILESYSTEM AS IN YOU NEED TO FORMAT THE DISC OR REPLACE YOUR CD/DVD DRIVE OR REPLUG IDE PLUG. FLOPPY DISK:NO FLOPPY IN DRIVE, BROKEN/DAMAGED DRIVE, CORRUPT OR UNFORMATTED DISK, UNPLUGGED IDE ON MOTHERBOARD. FIX: FORMAT FLOPPY, REPLACE FLOPPY DRIVE, PUT FLOPPY IN DRIVE. Disk read error is because your Harddisk's/CD/DVD drive/Floppy Drive is broken, corrupt, missing, unformatted or unplugged.