0
no, they have different bellhousings and oil pans
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is the correct timing for a 1986 Chevy Camaro 28L?
The order is 1,2,3,4,5,6
What is the fuel on 1983 S-10 28L?
gasoline-usually 89 octane. fuel filter is in the rochester 2se carburetor on a 2.8l 1983 Chevy motor.
What does the ditloid 28L in the WA mean?
28 Letters in the Word "Antidisestablishmentarianism"
28l beretta what sensor is located under throttle body but on engine by to small coolant lines spewing oil from it you pretty sure not oil pressure sensor?
could be tps or throttle positioning sensor
Where is the oxygen sensor located on a '89 Beretta w 28L V6?
it should be located on the rear manifold
The hypotenuse of a right triangle is 26 feet long One leg is 14 feet longer than the other Find the length of the shorter leg?
Let the length of the shorter leg be L, then the longer leg is L + 14.By Pythagoras then 262 = L2 + (L + 14)2 = L2 + L2 + 28L + 196 = 2L2 + 28L + 196676 = 2L2 + 28L + 196 : 2L2 + 28L - 480 = 0 : L2 + 14L - 240 = 0This can be factored : L2 + 14L - 240 = (L + 24)(L - 10) = 0As only a positive number answer applies and this is when L - 10 = 0 : L = 10.The length of the shorter leg is 10 feet.
Where can you find a wiring diagram for the spark plugs on a 1987 Chevrolet Camaro 28L V6?
Firing order is 1-2-3-4-5-6 Distributor rotates clockwise. Number 1 plug is located on passenger's side front of engine. Number 2 plug is on front of engine driver's side and so on.
Where is the starter on a 1987 Chevrolet Blazer S10 with a 28L V-6 motor at?
under exaust manifold on passenger side
How many psi is the fuel pump on a 1988 buick century custom v6 28l fi?
Should be around 40 psi
87 Chevy S10 28l V6 and one lifter collapsed and warped the pushrod Can you just change that one bad lifter and do you have to take off the intake manifold to get the lifter out please help?
You can change just the one lifter, however you should determine why it went bad. The intake manifold must come off to get to the lifter. Is there advanced mileage? do you change the oil regularly? Seeing how it is an 87 vehicle, with 19 years of use on the engine, I would strongly suggest changing the full set. Be carefull though as there is the possibility on that engine of 2 different size lifter bores. If yours are oversized it will be stamped on the lifter bore (not on the lifter) 0.25mm 0.5 There should also be a white paint mark at the bore.
Where is the map sensor located on a 85 camaro 28l?
should be a small black plastic box close to the distributor mounted on a bracket. it will have a couple of wires and a vacuum line the runs to the intake manifold
What does it mean when you have low levels of Immunoglobulin G Qn Serum?
what does it mean when my IGM is low at 28L
