0
Will a 1994 2.2L Chevrolet cavalier engine fit a 1996 cavalier with 1996 if so what will i need to do to make this work?
Wiki User
∙ 16y ago
It should fit if both cars had that engine from the factory. If the 1996 was a Z24 (2.4L), then there will be differences - most likely with engine electronics. Hope this helps!
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Is a 1996 Pontiac Sun Fire 2.2 engine the same as a 1996 Chevrolet Cavalier 2.2 engine?
Yes
What is the timing marks for a 1996 Chevrolet Cavalier 2.2 engine fuel injected?
yes
Where is the coil pack on a 1996 cavalier?
The coil pack, on a 1996 Chevrolet Cavalier, is located on the top of the engine. The coil pack is near the electronic spark distributor.
Where is the oil pressure switch on a 1996 cavalier?
The oil pressure switch on a 1996 Chevrolet Cavalier is on the rear of the engine block. It will be directly above the oil pan.
Where is the headlight module in a 96 Chevy Cavalier?
The 1996 Chevrolet Cavalier headlight module can be found on the firewall, in the engine compartment. The module will be on the drivers side of the firewall.
Check oil light sensor 1996 cavalier?
On your 1996 Chevrolet Cavalier 2.2L SFI OHV , the Oil Pressure Switch is located: Under hood, center, front engine area, next to transmission bellhousing, mounted on engine block.
What should the oil pressure be for a 1996 Chevy cavalier 2.2L?
Your 1996 Chevrolet Cavalier 2.2 liter engine oil pressure should be approximately 40 psi. A range of 35 to 45 psi is acceptable.
Will a 2001 cavalier engine fit in a 1996 Chevrolet S10?
no way i tryed that swap and didnt work ecu computer changed
1996 Chevrolet Cavalier won't start is it the fuel pump?
If a 1996 Chevrolet Cavalier will not start, it could very well be the fuel pump. It could also be the starter or battery.
Can a 22 L engine from a 1995 Chevrolet Cavalier fit a 1996 Chevrolet Cavalier if not why?
Yes! 1995-1999 yes it will fit but if you live in states that require inspections it will not pass because of the crank shaft sensor will not be picked up. been there done that!
What are the head bolt torque specs for a 1996 Chevy cavalier 2.2?
The 1996 Chevrolet Cavalier 2.2 liter engine had bolt torque specifications are 120 pounds. The head bolts should be torqued at 40 pound intervals.
How to route a serpentine belt in a 1996 cavalier?
1996 Chevrolet cavalier shuts off while driving and have to put in natural or park to restart
