Yes it will bolt right up to a V8.
Yes it will the trans will bolt to the t5 bellhouseing and the v6 belhouseing will bolt 2 the5.0
AnswerI believe the bolt pattern is different on the V-6 vs the 305. I think they might but im not sure. I know they make small block kits for a V6 S10.AnswerNo. The 2.8 V6 is known as a 60° V6. It shares the same trans bolt pattern as the 3.1 and 3.4 V6 and the 2.5 I4. If the '83 is an automatic then you can use a trans from a 4.3 V6 to bolt to the V8. This comes in handy especially on a swap with 4X4.
It depends on which v6 you have. If it is a 4.3 v6, then it is an easy swap. If it is a 3.8 v6 then the trans bolt patter will be buick style and won't fit unless you are lucky enought to have a BOP patterned bell housing. Also the v6 trans won't hold up to a v8. They have less clutches in the low gear and 3rd gear positions. Hope this helps.
A 4.2 liter V-6 transmission will bolt to a 351 cubic inch engine. You might need to change the Bell housing, in order to make it work.
no,the 4.3 engine has the same bolt pattern as a small block v8 engine
No the bolt pattern for the v6 and the v8 are different
yes it will bolt to a 350
manual trans 3.27qts
No. It won't bolt up, the bell housings are different for a V8 and V6.
Yes it will.
Bolt pattern on a 2000 Mustang is 5x4.5