Want this question answered?
Yes, a 351 windsor intake will fit a 302 engine as long as it is a 1976 or above. Although you will have to change the bolts, but yes it will work. 38 year certified mechanic
the cylinder walls are thicker but you can still swap the heads from a 351 winsor to a 302 and also the stroke is longer kinda like the 302 is a stroked 289.also if the motor is together the intake is much wider than a 302
Yes. I'm sorry but this answer should be NO, a 351w has a longer stroke than its little brother the 302 making the 351 intake a little wider than the 302 intake.
No it would not This is not totally correct, you can drill out the water ports located on the front of the heads block surface just enough to put shallow freeze plugs in them. then drill out the intake surface side to allow water passage through the intake manifold. and last but not least, you will need to purchase an after market intake for a Bogus Boss if your 351 Cleveland heads are the 2brl variety or if your lucky enough to have 4brl heads just find real 302 boss parts to finish out the job. I have done this 2 times and it will make your 302 come alive.
With cast iron heads it is 25 ft-lbs.
yes, gt40 heads should work on a 351 windsor. they should work on any small block ford from a 260 to the 351 windsor. Good luck!
No. The 351 starter is larger than the one for the 302, and is more powerful.
Yes as long as it is a 351 windsor.
intake is wider on a 351 block is wider on 351First off do not confuse the 351 Windsor from the 351 Cleveland. The 351 Cleveland was produced from 1970 to 1975. You can tell them apart is several ways.The 302 deck height is 8.2" and the 351 deck height is 9.5". Older versions of the 351 had a deck height that was 1/2" higher than the 302.The VIN # on the vehicle the engine is mounted in will tell you if it is the OEM engine. The 8th digit of the VIN is the engine code. H means it is a 302, N means it is a 351.The engine displacement may be stamped on the valve cover or on the intake manifold.Look at the head bolts. The 302 head bolts are 7/16" diameter and the 351 are 1/2".The Intake on a 351 is wider than a 302 because the deck height is higher.
The 302 boss has slightly bigger heads, it comes stock with 351 Cleveland heads.
Unlike chevys 305, 350, and 400 which are interchangeable. The Ford 302 and 351 are not interchangeable.
They should fit a 351 windsor.They will not fit a clevland.