Yes your throttle body is interchangeable, just make sure that all connections are the same, especially the electrical; you can make changes to fuel inlet & vapor return just don't get them mixed up. Use a new base gasket & you can gain a little torque by adding a phenolic(Hard Plastic) spacer between the manifold & throttle body.
Look for a black plastic sensor attached to the throttle body. Expect it to be black in color and directly opposite the throttle cam (where the throttle cable attaches.)
It is on the throttle body.It is on the throttle body.
On the throttle body.
It is on the throttle body.It is on the throttle body.
It is located on the throttle body... Just find the throttle linkage (its the thing that moves when you press on the gas) and its just right across that on the throttle body, held in place with 2 torx screws. Three wires plug into it
On the throttle body, opposite of the cables.On the throttle body, opposite of the cables.
It is a part of the throttle body. You have to replace the throttle body if faulty.
On the throttle body, opposite the cables.On the throttle body, opposite the cables.
It is on the throttle body opposite the cables.It is on the throttle body opposite the cables.
It is located on the throttle body
It is part of the throttle body assembly.It is part of the throttle body assembly.
Front of the throttle body.Front of the throttle body.