0
Yes.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What is ignition timing and idle speed specs for a 1972 Chevy 350?
A general number for timing is around 10 but that can change based on the engine setup. The idle speed also depends on the set up but its about 900-1000 and 700-800 in gear with a stock engine.
How do you set the timing and idle speed on fuel injected?
Most late model engines have fixed (non adustable) timing and idle speed adjustments. If there is a problem with either, it's probably related to an input signal to your car's on board engine management computer.
How does an idle control valve work?
The idle control valve works by regulating the idle speed of the engine. The idle speed of the engine is usually controlled by the engine of the computer.
How do you adjust timing on a 1985 Pontiac 305 when idle is off?
There is a idle screw on the throttle linkage on the carb that you can turn to increase the idle speed and then hook up your timing light to check the timing.
At what RPM should your truck be when timing it?
Idle speed is normal.
What is the meaning of idle?
of Idle
How do you adjust the engine idle speed on 2.7 liter 2004 Chrysler Intrepid engine?
Idle speed is automaticaly controlled by the computer. If idle speed is not correct, the car has a vacuum leak or a sensor problem.
What does a Idle speed control solenoid do?
The idle speed control solenoid controls the idle of the engine when the air conditioning is engaged. Since the ac pump draws down the engine idle the solenoid increase the idle when the ac is on.
What is the rp m's for setting the timing 5 5.7 liter engine?
Most people set the timing at idle speed. Around 700-800 rpm. If you have an advance timing light, you can set it for total timing, which is all in by 2800-3000 rpm.
How do I adjust the idle speed on my 86 Suzuki Samurai it idles at 2200 rpm after engine is warm. Idle screw does not lower idle?
You may want to check for sticking throttle linkage/cable and also your ignition timing may be advanced
What are the timing specs for a 1990 Nissan Sentra?
At idle speed with vacuum pipe disconnected and plugged E13 Engine 0 to 4 BTDC E15 Engine 2 to 6 BTDC
Mechanical idle stops will always be set to a higher speed than the engine idle speed.?
Yes
