no way, car rear ends are alot smaller then truck rear ends. it will not work.
The Chevy camaro is not front wheel drive but rear wheel drive as most sports cars.
Should be three on each side and two in the rear under the bellhousing.
Yes you can, But the 308 ring and pinion will have to be for the 1982 carrier that's in it now.
No, the full size Ford Bronco tire carrier is fitted to the round body parts on the right rear of the vehicle. Also it has a support bracket that the swing arm clips into that is bolted into the rear gate. It will not just bolt up to the chevy.
Yes , they always have been rear wheel drive
If they are both 10 bolt, which means that 10 bolts holding on the rear end cover, and have 8.5" diameter ring gear.
Look it uo on youtube
The HOUSINGS are the same, But the gear ratio is probley different.
no they are not. the truck rear is bigger and heavier duty plus it has 6 bolt axles and the camaro has 5 bolt
I don't remember 1985 Chevy 1/2 ton pickupshaving rear disc brakes. It should be a drum brake in the rear and disc brakes in front.
yes the rear end is the same from 82-2002 the breaks and gear ratio's are what makes the difference
The 2002 Chevy Suburban features speakers which are 6 and a half inches. This size applies to both front and rear speakers.