It could leak from either end.
Which part do you want to replace? The slave cylider or the master cylinder? The hydraulic line and master cylinder.
The Slave Cylinder and the Master Cylinder control totally different systems. The Slave has to do with the clutch, and the Master has to do with the brakes. They have nothing in common.
master cylinder, caliper, wheel cylider and power streeing
The slave cylinder would be the part at the transmission.
The clutch master cylinder is in the engine compartment and the slave cylinder for the hydraulic clutch is inside the manual transmission bellhousing
no. the clutch master cylinder is under the hood, typically near the brake master cylinder, and the slave cylinder is underneath, connected to the fork and throwout bearing on the transmission.
The clutch master cylinder is in your engine compartment , the hydraulic clutch slave cylinder is inside your manual transmission bell housing
For master cylinder, lift the hood, look to the top right corner. It's the smaller of the two (brake master cylinder is the other one). The clutch slave cylinder is on the underside of the transmission.
There is a smaller master cylinder next to the brake master cylinder. The clutch uses brake fluid also. If you mean where does it go if it is low, the slave cylinder on the transmission is probably leaking.
It's on top of the transmission. Follow the tube coming from the master cylinder.
The slave cylinder is not on the firewall, it is at the transmission. The master cylinder is on the firewall.
No