0
You were told you only needed to replace the lower ball joint on the front of your 1999 S10 Blazer Shouldn't both sides be done since you have to have it aligned too?
Wiki User
∙ 17y ago
Traditionally we always did them in pairs, because its just a matter of time before the 2nd one wears out. And they both have the same mileage and use. I although have heard lately replacing only the worn one. Doesn't make a lot of sense to me.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
What Torx size needed to replace belt tensioner on 87 s10 blazer with 2.8 v6?
T55
You hear a humming nosie under your blazer when it is running?
More the likely the transmission filter is restricked are stoped up. Check and replace as needed.
Why does your 2006 Chevy trail blazer hum around 60 mph?
You need to check all 4 wheel bearings. REPLACE AS NEEDED
When should I replace the timing chain on a 1998 blazer?
That is something that last the life of the engine almost everytime. You just DON"T have to replace it like it needed done on the old engines.
91 grill in a 87 s10 blazer?
This can be done, though some modifications may be needed. If you need to replace your core support (rad support) as well, order a core support for a 91 S10 blazer. This will help do away with the mounting issues. I did this to a 1985 S10 blazer and the grill fit fine with the factory core support, but not all of the mounting locations matched.
How many plea squats are needed each day to lose weight in your inner thighs?
you shouldnt boys like theigs
How do you time a 1999 Blazer?
You can not adjust the timing, Its controled by the ( ECM )- computer no adjustment needed.
What is the special tool needed to remove the spring to replace the pins bushing on a 2002 blazer drivers side door?
There is a spring compressor made by SNAP-On, MAC, etc. I went to a body shop and borrowed one ; then the job is easy.
How many pounds of fuel pressure is needed for a Chevy blazer with a 4.3l?
Need to know what year
What backspacing is needed on a 2001 Chevy Blazer?
the backspace key is located above the enter key
Allen wrench size needed to remove caliper on a s10 Chevy blazer?
3/8"
What type of employees are needed for a fashion designers?
people who are creative and do as their told. You need to be patient and shouldnt expect your design to go out in the market straight away
