answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Your cruise control stop working you checked the fuse and it was fine what can you do about it?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How come the cruise control blinks and does not engage on a Nissan Xterra?

Read the manual, but I believe it says when the cruise light blinks there is an error with the cruise control and should be checked. I have had mine blink before and then the next time I used it, it was fine.


Is there a fuse or relay for 99 grand caravan cruise control.. light on dash not working but airbag and horn work fine..I don't think its the clock spring?

I believe there is no fuse just for the cruise control. The cruise control circuit is covered by the PCM. However, I would check the switches on the brake pedal.


What could cause that the cruise control switch doesn't work in your 02 impala?

most cruise control problems are caused by a leaking vaccum canister that controls the throttle on the cruise, your switch is probably fine.


2004 Yukon speedometer not working but cruise works fine how do you tell if the VSS is operating correctly?

there is a recall for this


Cruise control 1999 Jeep not working?

I had the similar problem with my Jeep 1999 grand Cherokee cruise control not working the gates for the interior worked fine just no cruise control, looking at the other respondence I found that the vacuum hose off the control unit was bent going to a auto parts store and bought a slight bit longer hose and is now working fine I was ready to replace the whole unit. the other thing is the upper radiator hose looks to be 1½" on both ends it is not the NAPA hose calls for #9117 and states it is same on both ends which is 1½" the correct one is from pep-boys Dayco 1-15/32" slight bit smaller and works much better and cheaper.


How do i fix my Cruse control 1997 Ford Taurus?

On my 95 Taurus the cruise control wires broke off inside the steering wheel. After reconnecting them the system worked fine.


How do you install cruise control on Nissan Frontier?

Depending on the year of your Frontier, this may or may not help. Brian Stenger put together this "How To", and did a fine job at that!http://www.bsteng.com/2008/06/20/1st-gen-nissan-frontier-cruise-control-install/


Cruise control buttons on steering wheel just quit working all of a sudden fuses are fine on 88 gt?

The problem could be vaccum related. Check if the air vents in the dash still blow air. If not, it's possibly a vaccum problem


Your ac is not working and the light on the switch on the dash board does not come on you checked the fuses it seems fine?

you might not have enough refregerant in the a/c system


Why is a1988 ford ranger heat control not working yet the core is fine?

The thermostat is probably stuck


What Battery does the jvc lp21138-001 remote control use?

mine has a duracell DL2032.. working fine..


What type of work is done to affect your cruise control and horn not to work?

There is a part called a clock spring located in the dash board and it controls both the horn and the cruise control. I had it replace on my Plymouth voyager and they both work fine now. There was a RECALL for airbags which fixes this very problem - they should fix it for you