To fix a P0741 (Torque Converter Clutch Performance) code along with a pending P0700 (Transmission Control System Malfunction) on a Dodge Caliber, start by checking the Transmission Fluid level and condition, as low or dirty fluid can cause issues. Inspect the torque converter clutch solenoid and related wiring for faults, as these components can fail and trigger the codes. Additionally, consider scanning for any other related trouble codes that could provide further insight. If necessary, perform a transmission fluid change and reset the codes to see if they return after a test drive.
To fix the P0741 code on a Dodge Caliber, which indicates a problem with the torque converter clutch (TCC) system, start by checking the transmission fluid level and condition; low or dirty fluid can cause issues. If the fluid is fine, inspect the TCC solenoid and related wiring for any faults or damage. Additionally, consider checking for any other transmission-related issues or error codes that may be present. If the problem persists, a professional diagnosis may be necessary to identify potential internal transmission failures.
Trouble code P0741 means:Torque converter clutch circuit performance or stuck on
Trouble code P0741 means:Torque converter clutch circuit performance or stuck on
Trouble code P0741 means:Torque converter clutch circuit performance or stuck on
From the OBDII Code book: P0741 - Powertrain: Torque Converter Clutch Circuit Performance/Stuck Off
Trouble code P0741 means:Torque converter clutch circuit performance or stuck off
Trouble code P0741 means:Torque converter clutch circuit performance or stuck off
Trouble code P0741 means:Torque converter clutch circuit performance or stuck on
P0741 = Torque converter Circuit Performance or stuck off. P0746 = Pressure Control Solenoid Circuit Performance or stuck off.
P0741 not C
(torque converter clutch circuit performance or stuck on)
Yes, the p0741 code and many other codes can sometimes be fixed when you flush the transmission.