0
To replace the pickup coil on a 1993 Chevrolet Caprice, begin by disconnecting the negative battery terminal for safety. Then, remove the distributor cap and rotor to access the pickup coil. Unscrew the retaining screws holding the coil in place, disconnect the wiring harness, and replace it with the new coil. Finally, reassemble the distributor components, reconnect the battery, and ensure the ignition system is functioning correctly.
What else can I help you with?
How do you change a pick up coil on a 1993 gmc suburban?
well if you truck have a coil pack you would have to replace the hold pack but if they a indviseual you can replace each one if thay are seprate it will cost a bout 100 apiece
How do you remove the pickup coil from a 1993 Chevrolet S10 4.3 6-cylinder?
remove the distributor cap remove the screws that attach the pick coil to the base of the distributor and replace in reverse order
1991 Dodge Dakota that won't START - I have already replaced the pick-up in the distributor and coil and coil wire you have power to the coil but there is not power coming out of the coil - help?
Replace the ECU.
Why my 1993 Honda accord lx has no fire at the distributor?
Bad coil? Bad Pick-up?
How do you change a pickup destributor?
you must remove the distributor, disassemble unit and replace pick up coil
Why won't a 1987 ford bronco II start-when you have replaced the coil and the module there is no spark?
Replace the pick up coil it's inside the distributor. This may fix it.
Why won't a 1987 ford bronco II start when you have replaced the coil and the module there is no spark?
Replace the pick up coil it's inside the distributor. This may fix it.
Where is the camshaft position sensor located on a 1991 Cadillac fleetwood?
Cam sensor is inside the distributor under pick-up coil. Some say whole distributor has to come out to replace, some have snuck it out by removing pick-up coil.
How do you replace pick-up coil Chevy 350 tbi?
Take off the old one, put the new one on.
What would make a 1993 Chevy Cheyenne 3 quarter ton not start besides the starter silinoid fuel pump fuel filter?
The ignition module, Ignition coil, Pick-up coil bad coil wire.
One of the answers said to replace the pick up coil- what is it and where is it thanks?
The pick up coil is located at the base of the distributor and plugs into the ignition module. The pick up coil's purpose is to sense or "pick up" the pulses of the distributor and tell the ignition module when to fire the spark plugs. The most critical part of the replacement of the pick up coil is to make certain you properly mark the orientation of the distributor to the engine block and the rotor to the distributor base. When you successfully make these markings, you will not need to check your timing when this job is finished.
Can one easily replace a 22re with a 6 cylinder in a 1993 Toyota pick up?
i just replace the motor mounts with supra mounts
