The 1972 Pontiac LeMans offered several engine options, including a 250 cubic inch (4.1 L) inline-six, a 350 cubic inch (5.7 L) V8, and a 400 cubic inch (6.6 L) V8. The 350 V8 produced 150 horsepower, while the 400 V8 had a higher output of 230 horsepower. Additionally, a 455 cubic inch (7.5 L) V8 was available for those seeking more power, delivering around 250 horsepower. These options catered to a range of performance preferences for buyers that year.
In 1969, approximately 14,000 Pontiac LeMans models were equipped with the 350 cubic inch V8 engine. This engine was part of the broader LeMans lineup, which included various options and configurations. The 350 engine offered a balance of performance and efficiency, contributing to the car's popularity during that era.
My 69 LeMans has blue interior and is silver with a blue vinal top.
Pontiac LeMans was created in 1962.
After looking at the Gates website ( they make timing belts etc. ) I found ( 3 ) 1989 Pontiac models that were available with a 2.0 L engine The Grand Am , Lemans , and Sunbird and NO , IT IS NOT AN INTERFERENCE ENGINE
.035
because of transmission failure
Weight on my Pontiac LeMans Sport registration is 3800
According to my best knowledge the '67 Tempest LeMans was available with: 400/360 HP Ram Air V8 Engine 428/360 HP 4bbl V8 Engine 428h.o./376hp 4bbl V8 Engine 230/265HP Inline 6 Engine Tempest 326/250 HP V8 Engine (<- the default engine) Tempest 326/285 HP 4bbl (<-differs from the above only in the higher compression #141 heads. [again best of my knowledge])
The Pontiac LeMans was originally manufactured in 1962. In 1961 the name LeMans was added to the Pontiac Tempest as a top of the line trim package, being called the Tempest LeMans. But it wasn't until 1962 that the LeMans was a vehicle , not just a trim package.
The gear ratio for a 1967 Pontiac LeMans with a 326 engine and automatic transmission typically ranged from 2.56 to 3.08, depending on the specific setup and options chosen. The most common rear axle ratio for this model was 3.08. However, it's important to verify the exact ratio by checking the vehicle's identification or rear axle tag, as different configurations and options could affect this specification.
If you are asking if a small block chevy V8 flywheel (most common engine in a 1967 Camaro) will work on a Pontiac V8 (most common engine in a lemans), the answer is no.
I have a 1991 LeMans, all I had to do was go to Autozone.