Do an internet search for Winchester Stock Oil by John Kay. He was a master restorer of old Winchesters and developed a finish like Winchester used before the 1940s. It is 100% linseed oil based, as were the original finishes, with a tint to give the Red-Brown Winchester color.
With a stock oil pan, it should only be about five quarts.
Linseed Oil
Yes, there is a way to make hardwood floors look new without refinishing. Cleaning the floors with a mineral oil based cleaner will make them like new. Murphy's Oil Soap has enough mineral oil to accomplish this task. There is also a product on the market called Amish Oil that will also clean hardwood floors.
800 RPM should yield about 25-40 lbs. of oil pressure on a stock motor.
mccull oil
oil-x
You rub oil into it.
go to your local marine dealer & get a teak oil kit it has. a cleaner. a bleach. & a bottle of teak oil. there are instructions on the box. good luck
The first step in refinishing a metal fire escape is to clean it. After it is cleaned, you will need to use an anti-rust metal primer. Then you can paint it, using two coats of exterior oil based, high gloss paint.
5Qts with stock oil pan
min of 5 psi at idle 45 to 68 at 3000 rpms
For all of you doubting Thomases.....Otis Oil and Gas is coming back to life. Hold on to your britches!!!! Or, should I say, "Hold on to your stock certificate!"