On a 1994 Ford Explorer :
The modulator valve for the A4LD automatic transmission is on the passenger
side of the transmission ( I believe it is behind a heat shield )
On the A4LD automatic transmission I BELIEVE it is on the passenger side of the transmission behind a heat shield
On a 1994 Ford Explorer : The modulator valve is on the outside of the A4LD automatic transmission , on the passenger side of the transmission , I believe it is behind a heat shield
The 1994 VW Jetta PCV valve is located on the outside of the air cleaner housing. You can find the valve on the back side of the housing.
The heater control valve on a 1994 Ford Explorer is located near the firewall on the passenger side of the engine compartment. My 1994 Ford Explorer has a four port valve. This means that there are four hoses connected to the valve. It is very easy to view, as it sits directly on top of the engine compartment, near the a/c drier. It is easy to access. Should take less than ten minutes to remove and replace it with an OEM part. A very fast and easy fix!
on the bottom of the oil pan!
For the engine oil , it is on the passenger side valve cover
OBDII started in 1996... OBDI was not as standardised PLL.
I have a 2004 Ford Explorer and the heat does not work, but when i try to turn the control valve to heat it makes a clicking noise. How do i fix it?
On the passenger side of the A4LD automatic transmission ( I believe it is behind a heat shield )
I believe the turn signal and hazard flashers are in the fuse box on 1991 to 1994 Ford Explorers
The egr valve is located on the back center of the engine. It is right under the intake manifold.
I'm not a mechanic / technician but I believe the answer is ( NO ) From what I have read , there are ( 3 ) different engine blocks for the Ford 4.0 liter Over Head Valve ( VIN " X " ) engine 1991 to 1994 models of Ford Explorer 1995 and 1996 1997 to 2000