On a 1994 Ford Explorer :
The modulator valve is on the outside of the A4LD automatic
transmission , on the passenger side of the transmission , I believe it is behind
a heat shield
On a 1994 Ford Explorer : The modulator valve for the A4LD automatic transmission is on the passenger side of the transmission ( I believe it is behind a heat shield )
Where is the transmission modular valve located on my 1994 Chevy 1500 pickup truck
On the A4LD automatic transmission I BELIEVE it is on the passenger side of the transmission behind a heat shield
On the passenger side of the A4LD automatic transmission ( I believe it is behind a heat shield )
No, that transmission is electronic controlled by the PCM.
A 1994 Plymouth does not have a modulator valve.
assuming your talking about the transmission modulator...visually inspect the transmission and look for a vacuum hose from the engine to the tranny...
Transmission Modulator Valve? Location=Right hand side of the transmission close to the rear .Covered by a heat shield because of the heat from the exhaust.Do not lose the pin after removal.Verify replacement modulator .Make sure it's your type.C3 transmission modulator look almost identical.Verify measurements at pin location .
I'm not a mechanic / technician but is your engine oil level going up I've heard that the modulator valve on the passenger side of the automatic transmission ( behind a heat shield ) can allow the transmission fluid to be sucked into the engine through the vacuum line if there is a problem with the modulator valve on Ford Explorers up to the 1994 model
I'm not a mechanic / technician but I believe it can if the automatic transmission uses a modulator valve that has a vacuum line connected to it because the vacuum comes from the engine . If there is a problem with the modulator valve then the transmission fluid could be sucked into the engine
Never heard of a modulator valve on a caravan is it for the trans? Chrysler transmisions do not have modulator valves
The factory transmission that belongs in that 94 model did not use are have a modulator valve. But to answer your question the line goes to any intake vacuum source. That year truck should have the 4L60E transmission in it.