The relay control module on a 1997 Mercury Tracer is typically located in the engine compartment, near the battery or the fuse box. It may also be found on the driver's side, towards the rear of the engine bay. For precise identification, it's best to consult the vehicle's service manual or a repair guide.
If you mean the Constant Control Relay Module, it is located under the air filter.
On a 1999 Mercury Sable : Relay # 30 is the Powertrain Control Module ( PCM ) relay
You can purchase a constant control relay module for a 1998 Mercury Tracer from several sources. Online retailers like Amazon, eBay, or specialized automotive parts websites such as RockAuto or AutoZone often stock these parts. Additionally, local auto parts stores or junkyards may carry used or new modules. Always ensure to verify compatibility with your specific vehicle model before making a purchase.
Nope. One is a relay, the other is a control module. The control module TELLS the relay when to operate.
Yes
go to a junk yard
The fuel pump relay for a 1988 Mercury Tracer is located under the center of the dash, and hidden by the carpet. There are websites that have the repair manual for a 1988 Mercury Tracer available to download, either free or for a small charge.
The 1996 Mercury cooling fan relay switch is on the back of the cooling fan motor. The relay switch should be labeled as such.
The Constant Control Relay Module(CCRM)interfaces with the Power Control Module(PCM)to provide control of the cooling fan, A/C Clutch and fuel pump. The module also includes the electronic engine control(EEC)relay to provide power the PCMThe CCRM is a set of 4 relays in one module. The relays are :1. Relay for the PCM (Powertrain Control Module)2. Relays for the high and low radiator fan speeds.3. Relay for the fuel pump.4. Relay for the Air Conditioning clutch on the compressor.
Mercury tracer parking lights may stay on due to a malfunctioning light switch or a faulty relay that fails to disconnect the circuit. Additionally, a wiring issue, such as a short circuit or damaged wiring harness, can cause the lights to remain illuminated. It's also possible that a sensor or control module is malfunctioning. Checking the light switch and inspecting the wiring for damage are good initial steps to diagnose the problem.
Constant Control Relay Module
it's on the firewall on the passenger side. There are (2) side by side.